Dual Lens Brake Light Backup / Reverse / Rear View / Stop Car / Van / RV Camera for Fiat Ducato, Boxer, Citroen Jumper (2006-2018) in CCD :
One for reversing view during parking ,
Another for back view during driving,
Much more safe
| Chip |
2399 |
| Image Type |
Sony CCD |
| Built-in Len |
1.7mm |
| Effective Pixel |
1280(H) * 960(V) |
| Horizontal Resolution |
1000 TVL |
| TV System |
NTSC / PAL |
| Lens Angle |
170 degree |
| IP Rating |
IP68K |
| Vibration Rate |
10G |
| B.L.C |
Back light compensation ( Auto ) |
| White Balance |
Auto white balance (Auto) |
| Minimum Lumination |
0 Lux ( LED ON ) |
| S/N Ratio |
>70dB |
| Electronic Shutter |
1/60-1/100,000 Sec |
| Power Consumption |
DC 12V(+/-10%) , 24V available |
| Power Consumption |
∠3W |
| Operation Temperature |
"-30ºC-+70ºC RH95% Max |
| Storage Temperature |
"-40ºC-+80ºC RH95% Max |
| Cable |
4 Pin, 10m cable with adaptor |
| Connector |
4P aviation connector |
| Audio |
without |
FAQ on Product :
1. Which model is this camera suitable for ?
All models, it is universal
2. What connector can the camera made ?
4 Pin aviation connector, RCA connector and BNC connector, and can be customized according to customers' requirement
4 Pin aviation connector is default , also match a cable for 4 Pin to RCA for dual use
3. Can this camera be made in 12- 24V?
Default voltage is 12V, also can be made in 12-24V
4. What chip does this camera use?
Normally Sony CCD 600 TVL and PC1058, default CMOS PC1058
5. Can this camera be built-in MIC?
Please contact us for this requirement
6. Can this camera be made in guideline ?
In CCD, it can be made in guideline or without guideline, no guideline default
In CMOS, it can be guideline on / off optional
7. Is this camera in PAL system or in NTSC system ? Mirror image or non-mirror image ?
Default is NTSC system, mirror image
But PAL system , non-mirror image also available
8. Is this camera waterproof ?
We use high quality waterproof materials, combined with special waterproof technology, each unit is tested 100%
Triple protection ensures the super IP68 waterproof performance and durability of the products
Make sure the camera not get water , not get fog after a period of use
9. What's the lead time ?
Normally 2- 5 days
How to Choose High Quality Camera ?
1. Waterproof performance:
Due to the working environment, the camera is exposed to the wind and rain all the year round, needs high waterproof rate
Cameras that are not waterproof are usually flooded after being used for a period of time, and finally can't be used at all
2. Interface :
Aviation head is recommended . Aviation head can be tightened, no need to worry loosening
Power supply and signal line are integrated, no bad contact
3. The shell must withstand high temperature :
Especially in summer, the temperature of inside and outside vehicle is very high
4. Chip :
Need to be CCD or high-quality CMOS
Because CCD and high-quality CMOS have more true vivid color and clear image,
Other low-end CMOS may have color distortion, which becomes black and white after a period of use
5. Lens:
Generally there are plastic lens and glass lens, they are very different
Plastic lens is very cheap, but the imaging effect is obviously inferior to glass
So glass lens is much better and good option
6. Aging :
Aging is a very important step to ensure the quality of camera
Most cameras that are sold very cheap in the market have not been aged,
so there will be many bad products especially after a large number of shipments
Advantages of our High Quality Cameras:
1. 4 layers PCB
2. Strong anti-interference capacity
3. Wires in all copper
4. Lens is 3G1P
5. Good color and anti-interference
6. Good waterproof
7. Before market and after market acceptable
8. Camera lens active alignment
9. Professional camera lab
10. Dust-free assembly workroom
11. Dust-free, constant tempreture and humidity warehouse
Our Hardware:
1. 2 automatic SMT production lines
2. Camera lens active alignment
3. Professional camera lab
4. Professional parking sensor lab
5. Professional reliability lab
6. Professional ESD lab
7. Dust-free assembly workroom
8. Dust-free and constant tempreture and humidity warehouse
Our Software:
1. Being supplied OEM orders to car factories such as Benz, Toyota, Suzuki, JAC
2. CE, FCC, RoHS, EMARK, NCC Certificated
3. ERP High Efficiency System
4. 15 years exporting experience
5. Reply your inquiry wthin 12 hours
7. All raw materials, PCBA and finished prodducts must be tested at least 3 times before shipment ( including IQC, QC, IPQC, QA )
More FAQ:
1. Do you have MOQ ?
Depends on , mostly 50-500 sets / model
Third brake light bakcup camera : 10-20 / model
2. Could you send me product sample before I place an order?
Yes, sample / trial order is acceptable
3. What is your warranty term ?
12 months normally, for good customers, 24 months acceptable
4. What's your packing ?
Neutral white box, neutral color box, clear bag optional, carton size depends on inner box
5. What is shipping way ?
DHL, UPS, EMS, FEDEX, Sea / Air , DDP
6. What is the lead time ?
3-7 working days for sample order, 30-45 working days for bulk order
7. What is payment term ?
TT/ Paypal /Western Union
8. What is price term ?
Ex-work, FOB, CIF etc
9. Why choose us OEM / ODM Partners ?
Shenzhen Topnavis has more than 10 years experience
Wide range of products, Top Quality and Design can make you be satisfied
OEM and ODM experince for Toyota / Tata / Suzuki / Hyundai Car factories and government project
Keep products and technology updated and trended
Dust free workshop, products test lab, constant temperature and humidity warehouse, SMT paster machine
Always keep stock for hot and regular models
OEM package, such as new function, tooling develop, PCB design, giftbox and user manual design
We only offer High Quality with Reasonable Price!
Audited Supplier 
){kind=link}
){kind=link}